site summary | Thu 20th/July/2006

INTERNATIONAL BUSINESS DEVELOPMENT & MANAGEMENT... CHEMICALS & INTERMEDIATES...
Valetime Group comprises several UK based companies that develop and operate business in key areas and special markets of the World. Established in 1989 initial interest in the emerging countries of Eastern Europe has now extended into Asia and the Americas. Early activities covered a wide range...

Group activities
The origins of the Group were in business consultancy, which led to business management and then trading. These remain as the three core activities of the Group - on an international basis. Moreover they have been integrated towards an unique approach for trading. Thus the chemical products...

An introduction to Valetime Group
Valetime Group Limited comprises several UK based companies that develop and operate business in key areas and special markets of the World. Initial interest in the emerging countries of Eastern Europe has now extended into Asia and the Americas. Early activities covered a wide range of products but...

Introduction to Valetime Limited
Valetime Limited was formed in 1989 to provide a formal and more traditional corporate vehicle for the trading activities of a specialist management consultancy partnership which, since the mid 1980's had become increasingly involved in the countries of Eastern Europe. This original interest emanate...

Introduction to Valetime Asia Limited
Valetime Asia Limited was established to provide a focus for business in the developing economies of Asia - particularly the People's Republic of China. The original interest was in key chemicals exported to China from producers in Eastern Europe - including Adipic Acid, PNT and Titanium Dioxide....

Introduction to Valetime Management Services Limited
In almost a return to its' origins Valetime Management Services Limited was created to provide specialist management and advisory services. Valetime Limited had been formed in 1989 to provide a formal and more traditional corporate vehicle for the trading activities of a specialist management con...

Introduction
Valetime Americas LLC is organized under the laws of the State of Florida, USA and is located in Orlando to operate within the Western hemishere time zones for business throughout the Americas. It's primary function is to develop markets for key speciality chemicals derived from the Europe...

This Web site
Like many others on the Web this site seeks to introduce the domain owner - in this case the Valetime Group. It is therefore a "billboard" and a "calling card" with information in the public domain. However this is also a working site based upon databases and is especially designed to support a)...

Introduction
Business Management covers support operations, through UK based companies, of production and associated facilities in other countries. Such support includes the procurement of key raw materials and equipment, marketing, strategic planning, accounting, finance and legal services. The origins ...

Carbon Products International Limited
Carbon Products International Limited – is the UK based company supporting some of Europe’s largest producers of Carbon Black, Coal Tar Pitch and other fractions from the destructive distillation of coal. http://www.carbonproductsinternational.co.uk

Introduction
Until details of this company are loaded onto our website, information can be obtained by contacting us directly by e-mail to enquires@valetimegroup.com.

Introduction
Formed in 2000 International Chemical Ventures was to become involved in the development of trading and related business opportunities for products derived from the production of coke from coal. Plants are located in the Donbass region of the Ukraine Whilst the coking process was the source o...

Introduction
Formed in March 1991 Nextgood has been used for strategic investment and procurement in a range of special projects or other Group companies and clients - typically related to the Consultancy & Advisory Services activity.

Introduction
Formed in 1990 "Recallrelay Limited" has been used to facilitate the supply of key equipment, machinery and related support to a number of industries in the emerging countries of Eastern Europe and the former Soviet Union.

Scanda Fisheries Limited
Scanda Fisheries Limited – is the UK based company trading in fish and fish products for supply to the markets of Eastern Europe.

Introduction
The origins of Valetime were in business & management consultancy - with the founding partners and many later additions to Group staff bringing experience from early careers with professional advisors. The focus for any advice has been the development of business in certain emerging economies...

Introduction
Until details of this company are loaded onto our website, information can be obtained by contacting us directly by e-mail to enquires@valetimegroup.com.

Introduction
Witton Investment Fund Ltd was established in 2005 to undertake property development projects. Its first major project is the construction of 1000 apartments in Kiev, Ukraine

Introduction to International Trade
Valetime Group limited comprises several UK based companies that develop and operate business in key areas and special markets of the World. Initial interest in the emerging countries of Eastern Europe has now extended into Asia and the Americas. Early activities covered a wide range of products...

Introduction
A G S = ( Adipic - Glutaric - Succinic mixture ) acid ( Low Dicarbon Acids, Dicarboxylic Acids ) The A G S acid available to Valetime has been further processed / refined to remove heavy metals and is marketed in this purified form as "P-AGS" This product is particularly suitable...

Specification
Specification information for AGS Acids is also available in PDF format at the bottom of this page. The A G S acid is a by-product, thus its composition may vary. Typical composition is listed on a dry basis. AGS acid available to Valetime has been further processed / refined to remove heavy meta...

Safety information for AGS (Adipic Glutaric Succinic) Acids
MSDS for AGS Acid is available in PDF format at the bottom of this page. STABILITY STABLE Substances to be avoided include strong bases and strong oxidising agents. COMBUSTIBLE. TOXICOLOGY May act as an Irritant Corrosive, causes burns. Harmful by inhalation, ingestion and through skin a...

Source
AGS acid ( Low DiCarbon Acid ) is a by-product from the production of Adipic Acid at Severodonetsk in the Ukraine. The A G S acid available to Valetime has been further processed / refined to remove heavy metals and is marketed in this purified form as "P-AGS" This product is particularly s...

Introduction
acetic acid. (ethanoic acid; vinegar acid; methanecarboxylic acid). CAS: 64-19-7. (CH3COOH). Glacial acetic acid is the pure compound (99.8% min), as distinguished from the usual water solutions known as acetic acid. Properties: Clear, colorless liquid; pungent odor. Mp 16.63C, bp 118C (7...

Safety information for Acetic Acid
TOXIC General Synonyms: ethanoic acid, vinegar (a dilute solution of acetic acid - for safety data on vinegar, click here), glacial acetic acid Molecular formula: C2H4O2 CAS No: 64-19-7 EC No: 200-580-7 Physical data Melting point: 16.7 C Boiling point: 118 C Specific gravity...

An Introduction to .....
ADIPIC ACID ( hexanedioic acid; 1,4-butanedicarboxylic acid ) Ranked 46th highest volume chemical in World use with a wide range of commercial applications : A - Biggest Use ( - by far; over 80 % ) Manufacture of Nylon an...

Specification / Quality
Traditionally Ukrainian production of Adipic Acid has been to Russian (GOST) standard No. 10558-80. This sets out the minimum standard for production. However, it is recognised that for many end users the colour and related characteristics (chromacitry, iron content etc.) are of vital importance...

Safety Information
Materials Safety Data Sheet Product : Adipic Acid 1. Other names : hexanedioic acid; 1,4-butanedicarboxylic acid. Formula : COOH(CH2)3COOH. CAS No. 124 - 04 - 9 ...

Supporting information
Further technical data and other suporting information covering this product is currently being loaded onto our website and will be available soon. The technical data will only be available to you after completion of the registration form, which will request a password allowing access. The proce...

Source of product
"SEV-DON" The plant at SEVERODONETSK ( "Sev-Don") is the largest chemical enterprise in the Ukraine and consists of 4 production groups: ammonia liquid, methanol,formalin and urothropin, argon; mineral fertilizers(urea, ammonium nitrate, ammonium carbonate salts), nitric acid, potassium and...

Introduction
aspartic acid. (asparaginic acid; asparagic acid; aminosuccinic acid). COOHCH2CH(NH2)COOH. A naturally occurring nonessential amino acid. The common form is L(+)-aspartic acid. Properties: Colorless crystals. Soluble in water; insoluble in alcohol and ether. Optically active. DL-aspart...

Safety information for Aspartic acid
Safety (MSDS) data for l-aspartic acid General Synonyms: aspartic acid, 2-aminobutanedioic acid, 2-aminosuccinic acid, (S)-(+)-aspartic acid, asp, sparaginic acid Molecular formula: C4H7NO4 CAS No: 56-84-8 EINECS No: 200-291-6 Physical data Appearance: white crystalline powder ...

An introduction to Caprolactam
Caprolactam - C6H11ON - is obtained from cyclohexanone oxime in a process termed "Beckmann rearrangement reaction." Caprolactam is produced in two forms: solid: white hygroscopic substance, with a specific mild odour, liquid: colourless, clear liquid, free of mechanical impurities C...

Specification
CAPROLACTAM (CAPROLACTAM CRYSTALLINE) specification is in the attached file.

Safety information for Caprolactam
General Synonyms: aminocaproic lactam, 6-aminohexanoic acid cyclic lactam, gamma-caprolactam, 2-perhydroazepinone, hexannic acid, hexanone isozime, e-caprolactam, epsilon caprolactam, various other names Molecular formula: C6H11NO CAS No: 105-60-2 EC No: 203-313-2 EU No: 613-069-00-2 ...

Source
The Cherkassy Open Joint-Stock company "Azot" - is one of the largest enterprises in Ukraine manufacturing mineral fertilizers, ion-exchange resins, caprolactam and other chemical products. Its construction began in 1962. ÎJSC Cherkassy "Azot" is the only manufacturer of caprolactam in Ukra...

Introduction
Cresol, a highly caustic, colorless solid or liquid with a sweet tarry odor, is used mainly as a disinfectant. Cresol is very corrosive to all tissues. When it comes in contact with the skin it may not produce any burning sensation immediately. Prickling and intense burning will occur followed by lo...

Safety Information
General Synonyms: cresylic acid, crysylol, tricresol, methylphenol Molecular formula: C7H8O CAS No: 1319-77-3 EINECS No: 215-293-2 Physical data Appearance: brownish liquid with a phenol-like odour Melting point: 11 - 35 C (?) Boiling point: 201 C Vapour density: 3.7 (air = 1)...

Specification
Specifications are enclosed in the files below.

Introduction
cyclohexanone. (pimelic ketone; ketohexamethylene). CAS: 108-94-1. C6H10O. Properties: Water-white to pale-yellow liquid; acetone- and peppermint-like odor. Bp 156.7C, fp ±32C, d 0.948, flash p 111F (44C), refr index 1.4507 (20C), vap press 135 mm Hg (100C), autoign tem...

Source
Cyclohexanone is the ketone portion of ketone alcohol. It is an intermediate chemical produced in combination with cyclohexanol by the oxidation of cyclohexane and used in the production of adipic acid. Cyclohexanone available to Valetime is derived from the chemical complex at Severodonetsk, Ukr...

Safety information for Cyclohexanone
General Synonyms: cyclohexyl ketone, pimelic ketone Molecular formula: C6H10O CAS No: 108-94-1 Hazard : CLASS 3 ( Flammable liquid ) UN 1915 Physical data Appearance: colourless liquid Melting point: -32 C Boiling point: 156 C Vapour density: 3.4 ( air = 1) Vapour pressure: ...

Specification
Specifications are enclosed in the document below.

Introduction
D A S Acid ( DSD acid, 4,4-Diaminostilbene-2,2-Disulphonic Acid ) CAS 81-11-8 Appearance : light yellow crystal powder No explosive, toxic, oxidising and radioactive hazards Uses : Intermediate for dyes and etc. DAS acid is one of a number of Valetime "integrated" ...

Specification
Please see the PDF version of the specification sheet.

Safety Information for DAS Acid
Safety information is listed below and is also available in PDF version. Safety data for 4,4'-diamino-2,2'-stilbenedisulfonic acid ========================================= GENERAL Synonyms: amsonic acid, flavonic acid, NCI-C60162, DASD, DAS, Tinopal BHS 2,2'-(1,2-ethylenediyl)bis(5-amino...

Introduction
2,4-dinitrotoluene. (DNT). CAS: 121-14-2. C6H3CH3(NO2)2. (1) 2,4-; (2) 3,4-; (3) 3,5-. Properties: Yellow crystals. D (1) 1.3208, (2) 1.32, (3) 1.277; mp (1) 70.5C, (2) 61C, (3) 92.3C. Soluble in alcohol and ether; very slightly soluble in water. A commercial grade, consisting of a mixt...

Safety information for Dinitrotoluene
Safety data for 2,4-dinitrotoluene Synonyms: 1-methyl-2,4-dinitrobenzene Molecular formula: C7 H6 N2 O4 CAS No: 121-14-2 EC No: 204-450-0 Physical data Appearance: solid Melting point: 67-70 C Boiling point: Vapour density: Vapour pressure: 1 mm at 103C Specific gravity: ...

Specification
Specifications for this product are enclosed in the document below.

An introduction to...
Dibutyl Phthalate (DBP, Plasticiser DBP, Di-(n-butil-ether)-ortho-phthalic acid) CAS 84-74-2 USES Plasticization of vinyl resins and other kinds of polymers in production of cable flexible PVC, artificial leather, rubber products, polymeric building materials, linoleum, film and sheet / pl...

Specification / Quality
Specification information is contained in the specification sheet below.

Safety Information
Safety information can be viewed in the Materials Safety Data Sheet (MSDS) attached below.

Source
Full information on the source of this product will be available soon.

An introduction to...
Dioctyl Phthalate (Extra Grade) (Di-(2-ethylhexyl) phthalate) CAS 117-81-7 USES Plasticiser, for PVC and other resins. Flexible PVC industry – flooring, wire & cables, shoes, cars, pipe, tubes, profiles. Liquid used in vacuum pumps. Dielectric fluid. Permitted component in food pac...

Specification
Please view the specification sheet attached below.

Safety information
Please see the Materials Safety Data Sheet attached below.

Introduction
Low Dicarbon Acids, ( Dicarboxylic Acids ) also known as A G S = ( Adipic - Glutaric - Succinic mixture ) acid comprising : ( 1 ) adipic acid. (hexanedioic acid; 1,4-butanedicarboxylic acid). CAS: 124-04-9. COOH(CH2)3COOH. ( 2 ) glutaric acid. ...

Source
Low DiCarbon (AGS) acid is a by-product from the production of Adipic Acid at Severodonetsk in the Ukraine. The Low DiCarbon / A G S acid available to Valetime has been further processed / refined to remove heavy metals and is marketed in this purified form as "P-AGS" This product is partic...

Specification
Specification for this product is enclosed in the file below.

Introduction
m-nitrotoluene. (m-methylnitrobenzene). CAS: 99-08-1. NO2C6H4CH3. Properties: Yellow liquid. D 1.1571 (20/4C), fp 15C, bp 232.6C, refr index 1.5466 (20C), flash p 223F (106). Insoluble in water; soluble in alcohol and ether. Combustible. Hazard: Toxic by inhalation, ingestion, skin abso...

Safety information for Methylnitrobenzene
Safety (MSDS) data for 2-nitrotoluene General Synonyms: o-methylnitrobenzene, 1-methyl-2-nitrobenzene, 2-methylnitrobenzene, o-nitrotoluene, o-nitrotoluol, 2-nitrotoluol, 2-nitrophenylmethane Molecular formula: C7H7NO2 CAS No: 88-72-2 EINECS No: 201-853-3 Physical data Appearance...

Introduction
m-cresol. (m-cresylic acid; 3-methylphenol). CAS: 108-39-4. CH3C6H4OH. Properties: Colorless to yellowish liquid; phenol-like odor. D 1.034, mp 12C, bp 203C, wt/gal 8.66 lb, flash p 187F (86C), autoign temp 1038F (558C). Soluble in alcohol, ether, and chloroform; soluble in water. Deriv...

Safety information for Meta Cresol
Safety (MSDS) data for m-cresol General Synonyms: meta-cresol, 3-methylphenol, 3-cresol, meta-cresylic acid, m-cresylic acid, 3-hydroxytoluene, m-methylphenol, 1-hydroxy-3-methylbenzene, m-oxytoluene, m-cresole, m-toluol Use: synthetic intermediate, component in disinfectants, wood preserv...

Introduction
Meta Para Cresol (Cresylic acid, Mixed Cresol, Synthetic cresol ) CAS 1319 - 77 - 3 C7H8O A commercial mixtures of phenolic materials boiling above the cresol range. An arbitrary standard in use for cresylic acids is that 50% must boil above 204C. If the boiling point is less ...

Safety information
Safety (MSDS) data for m-cresol General Synonyms: meta-cresol, 3-methylphenol, 3-cresol, meta-cresylic acid, m-cresylic acid, 3-hydroxytoluene, m-methylphenol, 1-hydroxy-3-methylbenzene, m-oxytoluene, m-cresole, m-toluol Use: synthetic intermediate, component in disinfectants, wood preserv...

Safety information
Safety (MSDS) data for cresol General Synonyms: cresylic acid, crysylol, tricresol, methylphenol Molecular formula: C7H8O CAS No: 1319-77-3 EINECS No: 215-293-2 Physical data Appearance: brownish liquid with a phenol-like odour Melting point: 11 - 35 C (?) Boiling point: 201 ...

Specification
Specification for this product is enclosed in the file below.

Introduction
o-nitrotoluene. (o-methylnitrobenzene). CAS: 88-72-2. NO2C6H4CH3. Properties: Yellow liquid. D 1.1629 (20C), fp ±9.3C, bp 220.4C, refr index 1.544 (25C), flash p 223F (106C). Insoluble in water; miscible with alcohol and benzene. Combustible. Derivation: From toluene by nitration...

Safety information
Safety (MSDS) data for 2-nitrotoluene General Synonyms: o-methylnitrobenzene, 1-methyl-2-nitrobenzene, 2-methylnitrobenzene, o-nitrotoluene, o-nitrotoluol, 2-nitrotoluol, 2-nitrophenylmethane Molecular formula: C7H7NO2 CAS No: 88-72-2 EINECS No: 201-853-3 Physical data Appearance...

Introduction
o-phenylphenol. (o-hydroxydiphenyl; o-xenol). CAS: 90-43-7. C6H5C6H4OH. Properties: Nearly white or light-buff crystals. Mp 56–58C, bp 280–284C, d 1.217 (25/25C), flash p 255F (124C). Soluble in alcohol; sodium hydroxide solution; insoluble in water. Combustible. Derivation: From re...

OPP Specification
Specification information is also available in PDF format at the bottom of this page. General Information =============== CAS: 90-43-7 EC No.: 201-993-5 Molecular formula: C6H5C6H4OH; C12H10O Synonyms: o-phenylphenol, o-hydroxydiphenyl; o-xenol; 2-hydroxybiphenyl, Nipacide OPP, biphenyl-2-...

Safety information
Safety (MSDS) data for 2-phenylphenol A safety sheet (MSDS) for OPP is available in PDF format at the bottom of this page. General Synonyms: 2-hydroxybiphenyl, Nipacide OPP, biphenyl-2-ol, p-phenylphenol Use: Molecular formula: C12H10O CAS No: 90-43-7 EC No: 201-993-5 Physical ...

Introduction
o-cresol. (o-cresylic acid; 2-methylphenol). CAS: 95-48-7. CH3C6H4OH. Properties: White crystals; phenol-like odor. D 1.047; mp 30.9C; flash p 178F (81C); autoign temp 1110F (598C); bp 191C; wt/gal 8.68 lb. Soluble in alcohol, ether, chloroform, and hot water. Derivation: (1) By fractio...

Safety information
Safety (MSDS) data for o-cresol General Synonyms: 2-cresol, o-cresylic acid, 1-hydroxy-2-methylbenzene, o-methylphenol, 2-methylphenol, o-toluol, 2-hydroxytoluene, o-hydroxytoluene Molecular formula: C7 H8 O CAS No: 95-48-7 EC No: 202-423-8 Physical data Appearance: colourless to...

Introduction
p-nitrotoluene. (p-methylnitrobenzene). CAS: 99-99-0. NO2C6H4CH3. Properties: Yellow crystals. D 1.299 (0/4C), mp 51.7C, bp 238.3C, refr index 1.5382 (15C), flash p 223F (106C). Insoluble in water; soluble in alcohol, ether, and benzene. Combustible. Derivation: From toluene by nitratio...

Safety information
Safety (MSDS) data for p-nitrotoluene General Synonyms: 4-nitrotoluene, 4-methylnitrobenzene, p-methylnitrobenzene Molecular formula: CH3C6H4NO2 CAS No: 99-99-0 EC No: Physical data Appearance: light yellow crystals Melting point: 53 C Boiling point: 238 C Vapour density: 4...

PNT Specification
PNT Specification sheet is available for download.

Introduction
Para Nitro Toluene Sulphonic Acid ( Para Nitro Toluene Sulfonic Acid ) CAS 121-03-9 C7H7NO5S Appearance : Milky white crystalline, soluble in ethyl or ethyl ether Uses : Mainly used in the manufacture of DSD acid fluorescent brighteners and dyes intermediate. PNTSA is on...

Specification
Specification as per attached file.

MSDS
Material Safety Data is contained in the attached PDF file and detailed below. MATERIAL SAFETY DATA SHEET PRODUCT NAME: P-NITRO TOLUENE-O-SULFONIC ACID 1. PRODUCT IDENTIFICATION CAS NUMBER: 121-03-9 SYNONYMS: 2 METHYL-5-NITRO BENZENESULFONIC ACID HMIS: HEALTH: 1 FLAMMABILITY: 1 ...

Supporting Information
An example of the PNTSA Packing Label is in the supporting files below.

Introduction
p-cresol. (p-cresylic acid; 4-methylphenol). CAS: 106-44-5. CH3C6H4OH. Properties: Crystalline mass; phenol-like odor. Wt/gal 8.67 lb, d 1.039, bp 202C, mp 35.25C, flash p 187F (86C), autoign temp 1038F (558C). Soluble in alcohol, ether, chloroform, and hot water. Derivation: (1) By fr...

Safety information
Safety (MSDS) data for p-cresol General Synonyms: 4-methylphenol, p-cresylic acid, 4-cresol, p-hydroxytoluene, 4-hydroxytoluene, p-methylphenol, para-cresol, p-tolyl alcohol, p-toluol Molecular formula: CH3C6H4OH CAS No: 106-44-5 EINECS No: Physical data Appearance: crystals ...

Introduction
phthalic anhydride. CAS: 85-44-9. C6H4(CO)2O. Properties: White, crystalline needles; mild odor. Sublimes below boiling point; d 1.527 (4C), mp 131.16C, bp 285C, flash p 305F (151.6C) (CC), autoign temp 1083F (583C). Soluble in alcohol, carbon disulfide, and hot water. Combustible. Deriv...

Specification
Phthalic Anhydride is available in three grades. GRADE N is produced from Napthalene. GRADE NK is produced from Napthalene. GRADE O is produced from Orthoxylene. Full detailed specifications can be downloaded in PDF format at the bottom of this page (see the Supporti...

Safety information
Safety (MSDS) data for phthalic anhydride General Synonyms: 1,2-benzenedicarboxylic acid anhydride, phthalic acid anhydride Molecular formula: C8H4O3 CAS No: 85-44-9 EINECS No: Physical data Appearance: white crystalline solid with choking odour Melting point: 131 C Boiling p...

Two sources for Phthalic Anhydride
Phthalic anhydride, the anhydride form of phthalic acid, is produced by the oxidation of orthoxylene or naphthalene. Three sources are available to Valetime : using Naphthalene - denoted as PA-N - from Avdeevskiy using Naphthalene - denoted as PA-NK - from Rubezhnoe using Orthoxylene -...

Introducing TiO2...
TITANIUM DIOXIDE - PIGMENTAL - RUTILE GRADE TITANIUM DIOXIDE ( TiO2 ) is derived from treating the naturally occurring ore Ilmenite (containing Titanium metal) with Sulphuric Acid and the resulting sulphate is further treated to produce an oxide. A PIGMENT is any substance, though usua...

Uses
Why use TITANIUM DIOXIDE ? Titanium dioxide (TiO2) is best known as the leading white pigment. This is because it is a photo-responsive material. In addition to its light-scattering abilities, TiO2 absorbs UV light energy. As a white pigment, TiO2 is widely used for its efficiency in scatteri...

Safety information
Safety (MSDS) data for titanium (IV) oxide General Synonyms: titanium dioxide, tiox, unitane, horse head A-420, titan white, numerous trade names Molecular formula: TiO2 CAS No: 13463-67-7 (1317-70-0) EINECS No: 215-280-1 Physical data Appearance: white powder Melting point: 18...

Specifications
Specifications are available for downloading at the bottom of this page. New Specifications are available for grades R-202 and R-203. TiO2 produced for VALETIME is from Ukrainian production to Russian (GOST) standard No. 9808-84. This sets out the minimum standard for production. The assay o...

Source of Product
"Sumy" TiO2 for VALETIME is produced by SUMYKHIMPROM - a large chemical industrial complex located in Sumy in the North-East of the Ukraine. Its products include plant nutrients, paints, titanium dioxide pigments and coagulants used in water treatment. The plant provides for the production of ...

Introducing ...
CARBON BLACK Carbon black is an engineered compound made - in the case of product from VALETIME - from a coal-based feedstock derived from coke making and known as anthracene oil. Anthracene oil is heated in a specially designed furnace, to produce a gas stream laden with carbon black powder...

“K-Series” Carbon Black
Valetime Group now offer Carbon Black / Special Blacks from two sources. These are refered to as “K-Series” and “S-Series”.

“K Series” - Specification
Kremenchug produces active and semi-active carbons from anthracene oil ( derived from coke production using local coal ) to 5 GOST standard ( Russian ) Grades and 9 ASTM grades. Anthracene oil is heated in a specially designed furnace, to produce a gas stream laden with carbon black powder. The ...

“K Series” - Source of Product
Carbon black for VALETIME is produced at KREMENCHUG Carbon Black Plant - the most modern of 2 plants in the Ukraine. Production at Kremenchug dates from 1965, was first expanded in 1975 and progressively developed since - culminating in the mid-1990’s in preparations for privatisation in May 199...

“S-Series”
Valetime Group now offer Carbon Black / Special Blacks from two sources. These are refered to as “K-Series” and “S-Series”.

“S-Series” - Specification
“S-Series” Carbon Black is available in the following grades: N330, N339, N375, N550, N772 and N762. Grade Iodine absorptionCTAB m1/100gDBP m2/gToluene discoloration, % minPour Density, g/dm3N330 82 ± 582 ± 5102 ± 585375 ± 30N339 90 ± 593 ± 5120 ± 585345 ± 20N375 90 ± 596 ± 5114 ± 585345 ± 20N550...

“S-Series” - Source
Further information to appear shortly.

Safety information
Safety (MSDS) data for carbon black General Synonyms: lamp black, channel black, furnace black, acetylene black, thermal black, soot, carbon soot. Molecular formula: C CAS No: 1333-86-4 EINECS: 215-609-9 Physical data Appearance: finely divided black dust or powder Melting poin...

Ammonium Sulphate Specification
Ammonium Sulphate is available in three grades conforming to the Technical Requirements of Ukraine: 322– 001 904 43 – 067 – 97. Please see the PDF version of the product specification sheet for further information.

Coal Tar DiCresol Specification
Specification sheets are available below in PDF format.

Introduction
Coal Tar Pitch Dark-brown to black amorphous residue left after coal tar is redistilled. It is composed almost entirely of polynuclear aromatic compounds and constitutes 48–65% of the usual grades of coal tar. Different grades have different softening points: roofing pitch softens at 65C, ele...

Specification
Specification for Medium and High Temperature grades of Coal Tar Pitch is enclosed in the supporting files.

Safety information for Coal Tar Pitch

Cresylic Acid Specification
Specification sheets are available below in PDF format.

Electrode Coal Tar Pitch Specification
Electrode Coal Tar Pitch is available in 4 grades that conform to GOST 10200-83. Please see the PDF version of the product specification sheet for further information.

Electrode Pitch Coke Specification
Electrode Pitch Coke is available in 4 grades that conform to GOST 3213-91: Extra Class First Class Grade 2 Grade 3 Please see the PDF version of the product specification sheet for further information.

Pitch Coke Breeze Specification
Pitch Coke Breeze is available in 2 grades which, conform to the Technical Requirements of Ukraine: 322 – 001 904 43 – 147 – 97. Please see the PDF version of the product specification sheet for further information.

Specification
SODIUM THIOCYANATE is available in 3 grades: Extra Class (GOST 13367-77) First Class (GOST 13367-77) Standard Class (Technical requirements of the Ukraine 322 – 001 904 43 – 112 – 96) Please view the PDF version of the product specification sheet for further information.

Undersized Pitch Coke Specification
Undersized Pitch Coke is available in a "Standard Grade" that conforms to the Technical Requirements of Ukraine: 231– 001 904 43 – 071 – 2001. Please view the PDF version of the product specification sheet for further information.

Xylenoles Specifications
CRUDE Xylenoles Fraction 3,5 Xylenole Specification sheets are provided below in PDF format.

Ammonium Nitrate (NH4NH3)
Ammonium nitrate (NH4NH3) is used for production of ammonites, nitric oxide and in agriculture – as a mineral fertilizer. As a mineral fertilizer it is effective in all zones and for almost all agricultural crops. Ammonium nitrate is used as a presowing-appllied fertiliser, as well as for ea...

Ammonium Nitrate Specification
Ammonium nitrate (NH4NH3) is produced to GOST 2-85 in three grades: Standard Grade A; Standard Grade B - Higher grade; and Standard Grade B - First grade. Specification information for all three grades in available in PDF format below.

NPK 15:15:15
Safety and Specification information for this product is available by selecting a link to the right hand side.

NPK Specification information
NPK 15:15:15 ========== Mass portion of general Nitrogen (N), % not less: 15±1 Mass portion of general Phosphates into (P2O5), % not less: 15±1 Mass portion of Soluble Potash (K2O), % not less: 15±1 Mass portion of wet, % not more: 2 Sum of feed substance, % not less:...

NPK Safety information
PHYSICAL PROPERTIES Boiling Point: Not applicable Solubility in Water: Greater than 90% Density: 64 lbs/ft3 % Volatiles (by volume): Not applicable Flashpoint: Non-flammable Vapor Pressure, mm Hg: Not applicable pH: Not listed Reaction with Water: None Appearance: Greenish-gray gr...

Urea / Carbamide CO(NH2)2
SUMMARY Urea is used for melamin, cyanuric acid, urea-formaldehyde resin, medicinals production; as one of the components for cosmetics compounds; in agriculture as the most concentrated nitrogen fertilizer (contains 46,2% of nitrogen), for various agricultural crops growing in any soils; and as ...

Urea / Carbamide CO(NH2)2 Specification
Urea is produced to GOST 2081-92 in three grades: Grade Standard B - Higher Grade; Grade Standard B - First Grade; and Grade Standard B - Second Grade. Specification information for all grades is available in PDF format below.

Introduction to 2-Naphthol
2-Naphthol CAS 135-19-3 Use Intermediates, recommended for Pigments manufacturing Availibility Available in Technical and Refined forms.

Safety information
Safety information is contained in the MSDS sheet attached below.

Introduction to N-Phenyl-2-Naphthylamine
N-Phenyl-2-Naphthylamine CAS 135-88-6 This compound is used as an antioxidant in rubber processing and to provide oxidation and flex-cracking resistance in natural rubber, synthetic rubbers and latexes. It is used as a stabiliser in electrical-insulating silicon enamels and as an antioxidant...

Specification
The Specification is available in the attached file.

Safety MSDS
PHYSICAL DATA Appearance: light grey powder or crystals Melting Point: 108 °C (Specification 104.5 °C) Boiling Point: 395 °C Specific Gravity: 1.34 STABILITY Stable. Incompatible with oxidizing agents. TOXICOLOGY Harmful. Possible human carcinogen. May act as a sen...

Introduction & Uses
Naphthalene is a white solid with a strong smell. More common names that are used are mothballs, moth flakes, white tar, and tar camphor. Naphthalene is a natural component of fossil fuels such as petroleum and coal it is also formed when natural products such as wood or tobacco are burned. Napht...

Safety Information
Safety (MSDS) data for naphthalene General Synonyms: albocarbon, mighty 150, mighty rd1, moth flakes, NCI-C52904, white tar, naphthalin, naphthene, camphor tar, tar camphor, moth balls Molecular formula: C10H8 CAS No: 91-20-3 EC No: 202-049-5 Physical data Appearance: white cryst...

Avdeevskiy Coke Processing Works (ACPW)
Naphthalene is produced at Avdeevskiy Coke Processing Works (ACPW) - based in Donbass (Ukraine) and one of the largest fully integrated coking facilities in Europe. Production mix ranges from blast furnace coke to coal oils and speciality chemicals - for example Naphthalene and Phthalic Anhydride. ...

Specification
Napthalene Napthalene is available from two sources. Both supply three grades: Crude; Refined; and Pure. Specification sheets are below in PDF format.

Introduction
EPS-SE is available in 1. Packaging grade (u) - for technical goods 2. Packaging grade (u) - for food products 3. Construction grade Applications ========= EPS-SE U TECHNICAL GRADE is for packaging production of technical goods. EPS-SE U FOOD GRADE is for packaging production of foo...

Specification
A full specification sheet is available to download as a PDF at the bottom of this page. EPS-SE is available in 1. Packaging grade (u) - for technical goods 2. Packaging grade (u) - for food products 3. Construction grade Packaging ======== Product is packed in 25-kg polypropylene bags wi...

General Purpose Polystyrene - GRADE PSM and PSS
Applications ========= PSM-115 is for manufacturing of goods for technical purpose and goods of national consumption with die casting method. PSM-118 is for manufacturing of goods with irregular shape for technical purpose and goods of national consumption with die casting method. This grade ...

Specification
A full product specification is available for download as a PDF at the bottom of this page. Packaging ======== Production is packed in 25-kg polypropylene bags with polyethylene liner. On request of customer palletizing is possible. Storage ====== Product is stored in closed rooms at s...

High Impact Polystyrene - GRADES UPM & UPS
APPLICATIONS =========== UPM-0703 E is for manufacturing of sheets and inside details for refrigerators with operating mode of chamber with minimal temperature -18°C; UPM-0703-L is for manufacturing of large-sized goods for technical purpose , goods of national consumption and component...

Specification
A full product specification is available to download as a PDF file at thte bottom of this page. Packaging ======== Product is packed in 25-kg polypropylene bags with polyethylene liner. On request of customer palletizing is possible. Storage ====== Product is stored in closed rooms at ...

Quality - ISO 9001:2000 Certification
VALETIME Limited (VALETIME GROUP) is an ISO 9001:2000 registered company. ISO 9001:2000 is the number allocated to an international standard concerned with "Quality Management" Quality Mangement relates to a company's ability to meet customer requirements and achieve consistent product q...

Customer & Client Information
This section will give customer and clients secure access to information especially posted for them.